Comes standard with a 4 in. x 10 ft. hose, a 3 in. x 12 ft. hose, a 1.5 in. x 8 ft. hose, two extension rods, a crevice tool, one round and one oval brush, one HEPA filter, and two micro bat filters
15-Gallon Canister
Easy to maneuver on front caster wheels and 2 x 12" back wheels
Use for dust and debris control while maintaining and cleaning your chimney or dryer vent
Easily increase or decrease power depending on size of job
HEPA Filtration
Moves air at the rate of 405 cfm and creates enough suction to lift a 90" water column
3 Motor Powerhead chimney and dryer vent vacuum draws 405 CFM at 70" water column suction. Use one, two, or three motors as needed for task at hand. Able to control dust during sweeping and pick up debris during final cleanup. Three levels of filtration: SootStop Dacron pre-filter, blue fluoropolymer coated primary microbag filter, and HEPA cartridge filter. Use of SootStop Dacron bag is optional, but highly recommended whenever fly ash is encountered, such as with oil or coal burning appliance chimneys. Microbag filter stops 99% of fine debris, and the HEPA filter assures that no dust will enter your customer's home. Rugged roto-molded plastic 15 gallon tank. Comes with a SPARE microbag filter so you can wash one and use the other. Hoses include the 4" dust collector hose, which is the primary chimney sweeping hose. The 3" gray multiply hose is for dryer vent cleaning with the (9521) Y-Adaptor. The 1 1/2" hose and accessories are for debris cleanup.
WARNING: Carcinogens: This product can expose you to chemicals including Lead, which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
